Table of Contents
Advertisement
Store / Recall
˙ When blink cursor of menu is STORE, press the ENTER
button to store the presently reading to memory.
˙ The meter can store maximum 100 data in the memory.
˙ You can enter the recall mode to review the stored data.
˙ When blink cursor of menu is RECALL, press the ENTER
button to start recall mode.
˙ In the recall mode, you can press the UP or DOWN button to
review the stored data. When press it > 1sec, you can fast
search.
˙ Press the CANCEL button to exit this mode.
˙ To clear all data of stored function in memory, see the Power
On Options.
Auto Power Off
˙ If there is no any action in the meter, then the meter will
automatically turn off to save the power of batteries.
˙ The APO time is default 20 minutes.
˙ When the meter was power on, the APO was set to default.
To disable the APO, see the Power On Options.
Auto Backlight
˙ The backlight is automatically turned on at dark
environment.
˙ When the meter was power on, the auto backlight was set to
default. To disable the automatic, and enable / disable the
backlight, see the Power On Options.
Buzzer
˙ Equip 2kHz tone buzzer.
˙ Valid button press: Beep once
˙ Invalid button press: Beep twice
˙ To enable / disable the buzzer, see the Power On Options.
14
Advertisement
Table of Contents
