PCB
Printed Circuit Board is the control center of dishwasher, which receive and process signal
from components, send order to components and deal with the feedback information, etc.
Access PCB
Removing the protecting box.
The PCB can be removed from the protecting box in the bottom of machine.
1. Disconnect power supply;
2. Take out cutlery basket, basket and filter system;
3. Open the cover of bottom board.
4. Remove the screws for fixing protecting box and open the protecting box cap.
- 6 -
5. Disconnect the connector form PCB.
6. Remove the screws securing the PCB to control panel.
7. Remove the PCB.
8. Reverse the above procedure to install.
Bottom view
PCB
->
Theory of parts
protecting
box
screw
- 6 -