Procedure - Hanseatic WQP12-7311D Technical & Service Manual

Procedure of Test Program
Dis play on
No.
t he s c reen
0 88
1 05
Higher-speed
04/Temper- Washing Pump
2
ature value and Heating
Lower-speed
3 03 Washing Pump
and Dispenser
Regeneration
4 02
5 01 Drain Pump
6 F*
Process
Intialization Power on, stand by
Open inlet valve and feeds with 3.6L water(45cm model feeds
Inlet Valve
with 3.0L water).
Run higher-speed washing pump and 10s later run heating
element until the water temperature reaches 57℃. Then the
machine will pause.
Element Press Start/Pause button to jump into the next step.
2s later run lower-speed washing pump for 8s. Dispenser will act
for 45s in this step.
Open regeneration valve for 30s.
Valve
Drain for 30s.
finish Buzz one sound, stop, and stand by.

Procedure

(for models controlling water filling by flowmeter)
Description
Test Program
->
- 25 -