Operating An Aquos Link Device - Sharp Aquos LC-65XS1M Operation Manual

AQUOS LINK

Operating an AQUOS LINK device

AQUOS LINK allows you to operate the HDMI-
connected device with one remote control.
1
Open the remote control unit's flip cover.
2
Press PLAY I to start playback of a title.
• See this page, section "Playback of titles using
AQUOS LINK" if you want to start playback using the
list of the titles of the AQUOS BD Player.
3
Press FWD J to fast forward.
Press REV G to reverse.
Press STOP H to stop.
Press POWER to turn the HDMI-connected device
on/off.
Listening with the AQUOS LINK compatible audio system
You can opt to listen to the TV sound only from the
AQUOS LINK compatible audio system.
1
Open the remote control unit's flip cover, and
then press OPTION.
AQUOS LINK Menu
Recorder EPG
Top Menu/Title List
Media change
By AQUOS AUDIO SP
By AQUOS SP
Sound mode change
Setup Menu
Model select
2 Press a/b to select "By AQUOS AUDIO SP",
and then press ENTER.
• The sound from the TV speaker and headphone
terminal is silenced and only the sound from the
AQUOS LINK compatible audio system is audible.
You can use VOLk/l and M (Mute).
•
Listening with the AQUOS TV speaker system
You can opt to listen to the TV sound only from the
AQUOS TV speaker system.
1
Open the remote control unit's flip cover, and
then press OPTION.
2
Press a/b to select "By AQUOS SP", and then
press ENTER.
Manually changing the AQUOS LINK
compatible audio system's sound mode
1
Open the remote control unit's flip cover, and
then press OPTION.
2
Press a/b to select "Sound mode change".
3
The sound mode changes every time you press
ENTER.
• Refer to the operation manual of the AQUOS LINK
compatible audio system for details.
Calling up the menu of an external device
connected with the TV via HDMI
You can call up the menu of an HDMI CEC-compatible
external device (player, recorder, decoder, etc.) using
the "Setup Menu" function.
18
1
Open the remote control unit's flip cover, and
then press OPTION.
2 Press a/b to select "Setup Menu", and then
press ENTER.
NOTE
• If a connected device does not have this function or the device is in
a status where the menu cannot be displayed (recording, entering
standby, etc.), this function may not be available.
Playback of titles using AQUOS LINK
This section explains how to play back a title in the
AQUOS BD Player.
1
Open the remote control unit's flip cover, and
then press OPTION.
2
Press a/b to select "Top Menu/Title List", and
then press ENTER.
• The linked recorder now powers on and the TV
automatically selects the appropriate external input
source.
• The title list data from the connected AQUOS BD
Player displays.
3
Select the title with a/b/c/d, and then press
PLAY I.
Selecting media type for CEC-compatible
recorder
If your recorder has multiple storage media, select the
media type here.
1
Open the remote control unit's flip cover, and
then press OPTION.
2 Press a/b to select "Media change", and then
press ENTER.
3
Select the desired medium, such as DVD or
HDD. The media type changes every time you
press ENTER.
HDMI device selection
If multiple HDMI devices are connected in a daisy
chain, you can specify which device to control here.
1
Open the remote control unit's flip cover, and
then press OPTION.
2
Press a/b to select "Model select", and then
press ENTER. The HDMI device changes every
time you press ENTER.
Recording via the CEC-compatible
recorder's EPG (only for recorders)
You can call up the CEC-compatible recorder's EPG and
preset timer recordings using the TV's remote control unit.
1
Open the remote control unit's flip cover, and
then press OPTION.
2
Press a/b to select "Recorder EPG", and then
press ENTER.
• The external input source switches and the recorder's
EPG is displayed.
3
Select the programme to record.
You can use a/b/c/d, RTN (RETURN), EXIT and
•
the coloured buttons.
NOTE
• Refer to the operation manual of the recorder for details.