Auto Power On; Selecting Recorder; Selecting Channel Key; Using Genre Info - Sharp Aquos LC-40LB700X Operation Manual

AQUOS LINK

Auto power on

If this is activated, the One Touch Play function
is enabled. While the TV is in standby mode, it
automatically turns on and plays back the image from
the HDMI source.
Repeat steps 1 to 3 in AQUOS LINK control.
1
Press a / b to select "Auto power on", and
2
then press ENTER.
AQUOS LINK control
Auto power on

Selecting recorder

Selecting channel key

Using genre info.

Press c / d to select "On", and then press
3
ENTER.
Press MENU to exit.
4
NOTE
• The factory default for this item is "Off".
Selecting recorder
Here, you can select a recorder for the recording from
several connected recorders.
Repeat steps 1 to 3 in AQUOS LINK control.
1
Press a / b to select "Selecting recorder", and
2
then press ENTER.
AQUOS LINK control
Auto power on
Selecting recorder
Selecting channel key
Using genre info.
Select the recorder, and then press ENTER.
3
Press MENU to exit.
4
NOTE
• If you have connected the AQUOS AUDIO speaker system
between the TV and an AQUOS Recorder, the external source's
indication changes (e.g. from "INPUT 1" to "INPUT 1 (Sub)").
AQUOS LINK control
Auto power on
Selecting recorder
Selecting channel key
Using genre info.
74
LC-40LB700X_en_h.indd 74 LC-40LB700X_en_h.indd 74
Setting auto power on by AQUOS LINK
On Off
Selecting recorder for recording
by [REC] button
Input Location
INPUT1 [1. 0. 0. 0]
INPUT2 [2. 0. 0. 0]
Selecting recorder for recording
by [REC] button
Input Location
INPUT1 [1. 0. 0. 0]
INPUT1 (Sub) [1. 1. 0. 0]
INPUT2 [2. 0. 0. 0]
Selecting channel key
This function allows you to select the channel of the
connected HDMI device using the TV's remote control
unit.
Repeat steps 1 to 3 in AQUOS LINK control.
1
Press a / b to select "Selecting channel key",
2
and then press ENTER.
AQUOS LINK control Setting channel select key for AQUOS LINK
Auto power on
Selecting recorder
Selecting channel key
Using genre info.
Press a / b to select the input source of the
3
connected HDMI device you want to control
using the TV's remote control unit, and then
press ENTER.
Press c / d to select "On", and then press
4
ENTER.
Using genre info.
This function allows you to automatically switch to
the appropriate sound mode depending on the genre
information included in the digital broadcast.
Repeat steps 1 to 3 in AQUOS LINK control.
1
Press a / b to select "Using genre info.", and
2
then press ENTER.
Press c / d to select "On", and then press
3
ENTER.

Operating an AQUOS LINK device

AQUOS LINK allows you to operate the HDMI-
connected device with a single remote control unit.
Open the remote control unit's fl ip cover.
1
Press PLAY d to start playback of a title.
2
• See page 75, section "Playback of titles using
AQUOS LINK" if you want to start playback using
the list of the titles of the AQUOS BD Player/
AQUOS Recorder.
J
Press FWD to fast forward.
3
Press REV G to reverse.
Press STOP H to stop.
Press POWER to turn the HDMI-connected
device on/off.
compatible device via the HDMI input
INPUT1 On Off
INPUT2
On Off
INPUT3 On Off
8/7/2009 12:38:17 PM 8/7/2009 12:38:17 PM