Selecting A Drive Mode - Panasonic LUMIX DMC-LX100 Operating Instructions Manual

Selecting a Drive Mode

Recording mode:
You can switch the operation to be performed when you press the shutter button.
1
Press [
2
Press
press [MENU/SET]
[Single]
[Burst]
[Auto Bracket]
(→145)
[Aspect Bracket]
(→147)
[Self Timer]
(→148)
[Panorama
Shot]
*
Cannot be set when using [Intelligent Auto] Mode.
• To cancel drive mode, select [
"Single".
• When you press
however, that you cannot change the settings of [Single] and [Aspect Bracket].
141
] button (
to select the drive mode and
When the shutter button is pressed, only one picture is recorded.
The pictures are recorded in succession while the shutter button is
(→142)
pressed.
Each time the shutter button is pressed, the pictures are
*
recorded with different exposure settings based on the Exposure
Compensation range.
*
When the shutter button is pressed, 4 pictures with 4 different aspect
ratios are automatically recorded.
When the shutter button is pressed, recording takes place after the
set time has elapsed.
The pictures are recorded in succession while you press the shutter
button and move the camera horizontally or vertically, and then the
*
(→150)
camera combines the pictures into a single panorama picture.
, you can change the settings of each drive mode. Note,
)
] ([Single]) or [
Shutter and Drive Settings
Drive Mode
]. The recording is switched to
SQW0038