Panasonic LUMIX DMC-LX100 Operating Instructions Manual page 130

Enabling/disabling [Peaking] to add colour to the portions of the
image that are in focus
→ [Custom] → [Peaking]
●
[Peaking] functions during Manual Focus or when you are adjusting focus manually
using [AF+MF].
[ON] Colour is added to the portions of the image that are in focus.
[OFF] The portions of the image that are in focus are not displayed.
[Detect
Level]
[SET]
[Display
Color]
●
When [Peaking] is set to [ON], [
[LOW]) will be displayed.
●
When [Fn Button Set]
in the following order every time the assigned function button is pressed: [ON] ([Detect Level]:
[LOW]) → [ON] ([Detect Level]: [HIGH]) → [OFF].
●
Since portions with clear outlines on the screen are highlighted as in-focus portions, portions to be
highlighted vary depending on the recording conditions.
●
The colour used for highlighting does not affect recorded pictures.
Not available in the following case:
●
[Peaking] does not function in the following case:
• When the picture effect (Filter) is set ([Rough Monochrome])
130
The detection level for in-focus portions is set.
When [HIGH] is set, portions to be highlighted are reduced, allowing you to
achieve a more precise focus.
Settings: [HIGH] / [LOW]
• The detection level setting does not affect the focus range.
Sets the highlighting colour used for [Peaking].
Settings
The available colour settings differ depending on the setting of [Detect
Level].
Changing the [Detect Level] setting also changes the [Display Color]
setting as follows.
[Detect Level]
[
[Display Color] [
[
] ([Detect Level]: [HIGH]) or [
(→37) in the [Custom] menu is set to [Peaking], you can switch the setting
Adjusting the focus and brightness (exposure)
Taking pictures with Manual Focus
[HIGH]
] (Light blue)
] (Yellow)
] (Green)
[LOW]
[ ] (Blue)
[ ] (Orange)
[ ] (White)
] ([Detect Level]:
SQW0038