Connecting To A Smartphone Using Nfc Function - Panasonic LUMIX DMC-LX100 Operating Instructions Manual

Table of Contents

Advertisement

Connecting to a smartphone using NFC function

Using the NFC (Near Field Communication) function, the camera and a smartphone can
easily exchange the information needed to establish a Wi-Fi connection.
Compatible models:
This function can be used with NFC compatible devices with Android (2.3.3 or above).
(Not available in certain models)
• See the operating instructions of your NFC-compatible smartphone for more
information about smartphone operation and settings.
Preparations
(On the camera)
• Set [NFC Operation] to [ON]
(On your smartphone)
• Check if your smartphone is a compatible model
• Set Wi-Fi function to "ON"
• Install "Image App" in advance
1
Start "Image App" on your smartphone
2
While the [
screen of the "Image App", hold the smartphone
close to the camera
3
Use
to select [Yes] and press [MENU/SET]
4
Hold the smartphone close to this area of the
unit again
• When the connection is complete, live images captured
by the camera will be displayed on your smartphone.
• It may take some time to complete the connection.
• Connected smartphones are registered to this unit.
• From the next time and on, you can connect by
performing steps
233
Operating the camera by connecting it to a smartphone
(→272)
(→228)
] is displayed on the connection
1
2
and
.
Hold the smartphone
close to this area
(within 5 mm (0.20 inch))
Wi-Fi
SQW0038

Advertisement

Table of Contents
loading

Table of Contents