[Print Set] - Panasonic LUMIX DMC-LX100 Operating Instructions Manual

[Print Set]

Picture/picture no./date printing settings can be made for when printing with DPOF
print-compatible shops or printers. (Ask at the shop to check for compatibility.)
1
Set the menu
→
2
Select a still picture
[Single]
Use to select still picture and press [MENU/SET]
[Multi]
Use
3
Use to set number of still pictures and press [MENU/SET]
(Repeat steps
• Date print setting/release → Press
■
To clear all
1
In step , select [Print Set] → [Cancel] → [Yes], and then press [MENU/SET]
●
When you have performed [Print Set] for pictures in a group, printing settings are made for the
total of number of pictures set in that group. If the total number of pictures is 1,000 or higher,
[999+] is displayed.
●
When you perform [Print Set] for a picture in a group, the number of pictures set and the total
number of pictures are displayed with the Print Set icon of the first picture.
●
Date print setting cannot be made for pictures with a [Text Stamp] applied.
●
Depending on the type of printer, the printer settings may take priority over camera settings.
●
Some DPOF information (print settings) set by other equipment cannot be used. In such cases,
delete all of the DPOF information and then set it again with this camera.
Not available in the following cases:
• Motion pictures
• Still pictures recorded with the [Quality] setting [
• Cannot be set for files that are not compliant with the DCF standard.
220
[Playback] → [Print Set] → [Single] or [Multi]
to select still picture and press [MENU/SET]
2 3
and when using [Multi] (up to 999 pictures))
Playing Back and Editing Pictures
.
]
Using the [Playback] menu
Count
Date Date
1 2
4 5
Count
Date Date
3
6
SQW0038