Recording Motion Pictures - Panasonic LUMIX DMC-LX100 Operating Instructions Manual

Recording motion pictures

Recording mode:
You can record motion pictures by manually setting the aperture value and shutter speed.
(→80)
The camera automatically sets the aperture value and shutter speed and identifies the
optimal scene to record motion pictures in [Intelligent Auto] Mode.
1
Press the motion picture button to start recording
• Immediately release the motion picture button after pressing it.
• While you are recording motion pictures, the recording status
indicator (red) will flash.
• If you do not perform any operation for approximately 1 minute
or longer, some of the information on the screen is turned off.
To display the information again, press the [DISP.] button. This
operation takes place to prevent screen burn-in. This is not a
malfunction.
• Do not block the microphones when recording motion pictures.
• You can also use zoom while recording motion pictures.
– The operating sounds of the zoom lever or control ring may be
recorded in some cases.
• Still pictures can be taken during motion picture recording.
(→198)
2
Press the motion picture button again to end recording
190
Recording motion pictures
Recording motion pictures
(→76)
Recording state indicator
Elapsed recording time
Remaining recording time
(approx.)
SQW0038