Switching The Display Information On The Playback Screen - Panasonic LUMIX DMC-LX100 Operating Instructions Manual

Switching the display information on the playback
screen
You can disable the display of picture information (file number, etc.) and recording
information (settings used for recording, etc.) when a picture is played back.
1
Press [DISP.] button to switch the display
• The display is switched as shown below.
*
1
With information
*
1
If you do not perform any operation for approximately 1 minute or longer, some of the information
on the screen is turned off. To display the information again, press the [DISP.] button.
*
2
During Playback Zoom, Motion Picture Playback, Automatic Scrolling Playback of panorama
pictures, continuous playback or Slide Show: You can only turn the display on or off.
*
3
This screen is displayed only when [Highlight]
●
A histogram of each colour, including R (red), G (green), B (blue), and Y (luminance), is separately
displayed during playback.
●
During Multi Playback or calendar screen: Display cannot be changed.
71
Detailed information
*
2
display
10:00 1.DEC.2014
100-0001
(→72)
*
2
Histogram display
R
G
B
Y
1/98 100-0001
in the [Custom] menu is set to [ON].
Basics
Without
* * *
1, 2, 3
information
Without information
SQW0038