[Wi-Fi Setup]; [Touch Sharing]; Wi-Fi Setup - Panasonic LUMIX DMC-LX100 Operating Instructions Manual

[Wi-Fi Setup]

Configure the settings required for the Wi-Fi function.
[Wi-Fi Setup] cannot be changed when connected to Wi-Fi.
1
Set the menu
→
Item
[LUMIX CLUB]
Acquires or changes the
"LUMIX CLUB" login ID.
[PC Connection]
You can set the workgroup.
[Device Name]
You can change the name of
this unit.
[NFC Operation]
Makes NFC function setting.

[Touch Sharing]

Set the operation to be
performed when a Wi-Fi
connection is established
using the NFC function.
272
[Setup] → [Wi-Fi] → [Wi-Fi Setup] → Desired setting
• For details (→258).
You must connect to the same workgroup as the destination
computer when sending pictures to the computer.
(The default is set to "WORKGROUP")
[Change Workgroup Name]:
Enter the workgroup of the connecting computer. Close the menu
after changing settings.
[Restore to Default]:
Returns settings to default settings. A confirmation screen is
displayed. It is executed when [Yes] is selected.
Exit the menu after it is executed.
• Refer to "Entering Text"
text.
• To use with a computer of the standard settings, you do not have
to change the workgroup.
Press [DISP.] button
Enter the desired device name
• Refer to "Entering Text"
text.
• Up to 32 characters can be entered.
[ON]: The NFC function works.
[OFF]
[ON]: When a Wi-Fi connection is established using the NFC
function while playing back a single picture, the picture
(1 picture) is transferred.
[OFF]
Description
(→52) for information on how to enter
(→52) for information on how to enter
Wi-Fi
SQW0038