Taking Pictures After Setting The Aperture Value And Shutter Speed - Panasonic LUMIX DMC-LX100 Operating Instructions Manual

Taking pictures after setting the aperture value and
shutter speed
Recording mode:
You can set the exposure using the aperture ring and shutter speed dial settings.
Using the [Rec] menu to change settings and set up your own recording environment.
You can also record pictures by applying picture effects.
1
Turn the aperture ring and shutter speed dial to set your
preferred recording mode.
Align with
the indicator
Recording mode
[Program AE] Mode
[Aperture-Priority] Mode
[Shutter-Priority] Mode
[Manual Exposure] Mode
• In [Aperture-Priority] Mode, [Shutter-Priority] Mode, and [Manual Exposure] Mode,
the effect of the aperture value and shutter speed you have set is not applied to the
recording screen. To check the effect on the recording screen, use [Preview] Mode.
(→88)
The brightness of the screen may vary from the actual pictures recorded. Check the
brightness of pictures using the playback screen.
A faster shutter speed than the set shutter speed may be used when you record a
motion picture.
*
1
You can set the aperture values between F1.7 and F16.
You may not be able to select some values depending on zoom position.
*
2
You can set the shutter speed between 1 second and 1/4000 seconds.
Turn the control ring or control dial to set the shutter speed in the following cases.
• Higher speed than 1/4000 seconds or slower shutter speed than 1 second
• Shutter speed setting in 1/3 EV steps
80
(→81)
(→83)
Your preferred settings
(→84)
(→86)
Your preferred settings
(→89)
Set the aperture ring where it clicks.
Aperture ring
[A] (AUTO)
*
1
[A] (AUTO)
*
1
Recording mode
Shutter speed dial
[A] (AUTO)
[A] (AUTO)
Your preferred settings
Your preferred settings
SQW0038
*
2
*
2