Panasonic LUMIX DMC-LX100 Operating Instructions Manual page 320

I do not have a wireless access point at my home, but I would like to perform service user
registration of the "LUMIX CLUB".
• Service user registration for the "LUMIX CLUB" is not possible in the environment without a
wireless access point.
The camera cannot be connected to Mac computer/Windows PC via Wi-Fi connection.
→ Please confirm login name and password are correctly typed.
→ When the system time of Mac computer or Windows PC connected to a camera differs severely
from that of the camera, the camera cannot be connected to the computer or PC in some OSs.
Please confirm clock set and world time of the camera matches with time, date and time zone in
Windows PC or Mac computer. When both settings do not match severely, please match them.
I am having a problem connecting to my Windows 8 PC. The user name and password are not
recognised.
• Depending on the OS version, on Windows 8, for example, there are two types of user account
(local account/Microsoft account).
→ Be sure to set the local account and use the user name and password for the local account.
The Wi-Fi connection is not recognising my PC.
• By default, the Wi-Fi connection uses the default workgroup name of "WORKGROUP". If the name
of the workgroup has been changed, it will not be recognised.
→ Select [PC Connection] then [Change Workgroup Name] in the [Wi-Fi Setup] to change the
workgroup name to match that of your PC.
Pictures cannot be transmitted to the computer.
• If a firewall is enabled by the OS or security software, this unit may be unable to connect to the
computer.
Images cannot be transmitted to the WEB service.
• Confirm that the login information (login ID/user name/email address/password) is correct.
• WEB service server or the network may be busy.
→ Try again after a while.
→ Check the site of the WEB service you are sending the image to.
320
(→272)
Others
Q&A Troubleshooting
SQW0038