Recording Pictures Using The Viewfinder; Switching Between The Monitor And Viewfinder - Panasonic LUMIX DMC-LX100 Operating Instructions Manual

Recording pictures using the viewfinder

When you use the viewfinder, you can check the view of the subject even if you are in a
bright area.

Switching between the monitor and viewfinder

You can operate the [LVF]/[Fn3] button in two ways, using it
either as the [LVF] button or as a function button [Fn3].
You can use this button as the [LVF] button at the time of
purchase.
• For details on the function button, refer to (→37).
1
Press [LVF] button
• The display is switched as shown below.
Automatic switching
between viewfinder and
monitor
Automatic switching between viewfinder and monitor
For automatic switching between the viewfinder and monitor, the eye sensor
automatically switches the display to viewfinder when your eye or an object moves close
to the viewfinder.
• The eye sensor may not work correctly depending on the shape of your eyeglasses,
the way you hold the camera, or whether the eyepiece and nearby area are exposed to
strong light. In this case, press the [LVF] button to switch the display.
• During motion picture playback or Slide Show, the eye sensor will not automatically
switch the display to the viewfinder.
• The sensitivity of the eye sensor can be set using [Eye Sensor] in the [Custom] menu.
(→55)
54
Viewfinder display
Basics
[LVF] button
Eye Sensor
Monitor display
SQW0038