Taking Pictures Via A Smartphone; (Remote Recording) - Panasonic LUMIX DMC-LX100 Operating Instructions Manual

●
You can register up to 20 smartphones. If the number of registered smartphones exceeds 20,
registrations will be deleted starting from the smartphone touched first.
●
If you perform [Reset Wi-Fi Settings], smartphone registration will be deleted.
●
If the communication environment is bad, the NFC function may not be usable.
●
If there is not a response immediately, shift the position slightly.
●
Do not bump your smartphone strongly against this unit.
●
See the operating instructions of your NFC-compatible smartphone for more information about
smartphone operation and settings.
●
Metal objects between this unit and the smartphone may interfere with communication. Also, any
stickers, etc., near the NFC area may affect communication performance.
Not available in the following cases:
●
The NFC function cannot be used in the following cases:
• When the camera is turned off (Including [Sleep Mode])
• During motion picture recording
• While recording still pictures (during self-timer countdown)
• When using [Time Lapse Shot]
• When using [Stop Motion Animation]
• When using [Multi Exp.]
• During motion picture playback, during slide shows, during panorama picture playback, and
during continuous playback of group pictures (including pauses in each case)
• While sending pictures by Wi-Fi
• When connected to computer/printer
●
You cannot transfer still pictures in RAW format, AVCHD motion pictures, or MP4 motion pictures
with [Rec Quality] of [4K].
Taking pictures via a smartphone (remote recording)
1
Connect to a smartphone
2
Select [
3
Take pictures
• The recorded images are saved in the camera.
• When using zoom, the camera could tilt when the lens barrel extends. Make sure to secure the
camera in place with a tripod or by other means.
• Some settings are not available.
234
Operating the camera by connecting it to a smartphone
(→229)
] from "Image App"
Wi-Fi
SQW0038