About Eye Sensor Af - Panasonic LUMIX DMC-LX100 Operating Instructions Manual

Setting the sensitivity of the eye sensor or setting to switch the
display between the viewfinder and monitor
→ [Custom] → [Eye Sensor]
[Sensitivity]
[LVF/Monitor Switch]
About diopter adjustment
Adjust the diopter to suit your vision so that you can see the
viewfinder clearly.
Turn the diopter adjustment dial to adjust until you are able to
clearly see the characters displayed in the viewfinder.

About Eye Sensor AF

If the eye sensor is activated when [Eye Sensor AF] in the [Custom] menu is set to [ON],
the camera automatically adjusts the focus.
• Eye Sensor AF adjusts focus only once when you look into the viewfinder. It does not
continuously adjust the focus while you are looking into the viewfinder.
●
Even when [Eye Sensor AF] is set and the camera automatically adjusts the focus, a beep will not
sound.
Not available in the following case:
●
[Eye Sensor AF] may not work when the lighting is low.
55
Use this setting to set the sensitivity of the eye sensor.
[HIGH] / [LOW]
Use this setting to switch the display between the viewfinder and monitor.
[LVF/MON AUTO] (Automatic switching between viewfinder and
monitor ) / [LVF] (Viewfinder display) / [MON] (Monitor display)
• After the display is switched using the [LVF] button, the setting of [LVF/
Monitor Switch] will also change.
Recording pictures using the viewfinder
Diopter adjustment dial
Basics
SQW0038