Abbreviated Dial; Abbreviated Dial Program; Account Code Entry; Ad Suppress - Avaya 1408 User Manual

17.2.1 Abbreviated Dial

This action can be used as a speed dial button. While setting up the button, enter the number you would like it to dial.
You can enter a partial number and complete the dialing after pressing the button. For example pre-program the button
with a particular international dialing code.

17.2.2 Abbreviated Dial Program

This function is not supported on 1600 Series phones.

17.2.3 Account Code Entry

This action can be setup with or without an account code.
If the button is setup with an account code, that account code is applied to the current call when the button is pressed.
If the button is setup without an account code, pressing the button will display the

17.2.4 AD Suppress

This action can be used to suppress the display of numbers that you dial. When the action is enabled, any numbers that
you dial are displayed as s characters.
When on, the button's green lamp is lit. Pressing the button again toggles the action on or off.

17.2.5 Automatic Callback

A button with this action can be used to set a callback on a user who does not answer. After ring the user, press the
button. When the target user ends their next call, the system will ring you and then the targeted user.
When a callback has been set, the button's green lamp is lit. Pressing the button again cancels the callback.

17.2.6 Breakout

This action is useable within a
will allow selection of another IP Office system within the network. The number that you then dial will be output from that
IP Office system.
This feature is useful if you are able to hot desk to other IP Office systems within the network. While logged in on a
remote system, it will allow you to dial out from your home system as if still working there.

17.2.7 Call Forwarding All

A button with this action can be used to switch forwarding unconditional on/off.
If setup with a preset number, that number is used as the forwarding destination.
If setup without a number, when the button is pressed you will be asked to confirm your existing forward unconditional
destination number or to enter a new number.
The button's green lamp is lit when forwarding is enabled. The button can be pressed again to switch forward
unconditional off.
1408, 1416 Phone User Guide
IP Office
Small Community Network
enter account code
of IP Office systems. When the button is pressed, the menu
181
menu.
54
15-601040 Issue 05a (25 October 2011)
Page 118