Speaker Volume; Automatic Gain Control; Default Handsfree Audio Path - Avaya 1408 User Manual

18.9.6 Speaker Volume

While talking handsfree via the phone's speaker, you can adjust the volume of the incoming call.
1. With the call connected on the speaker, press the
2. Use the + plus and – minus keys to adjust the volume.
3. The display will return to normal after a few seconds.

18.9.7 Automatic Gain Control

When using automatic gain control (AGC), the phone tries to maintain a constant audio level even if the incoming call
changes between loud and quiet.
1. Press the MENU button.
2. Use the up and down
3. Press the Select soft key.
4. Use the up and down
5. Press the Select soft key.
· Use the up and down
automatic gain control.
· To change a setting, use the
6. When completed, press the Done soft key.
7. Press the Exit soft key to exit the menus.

18.9.8 Default Handsfree Audio Path

By default, when you make a call or answer a call without lifting the handset, the audio is played through the phone's
speaker while you speak via the phone's microphone.
If you have a headset attached, you can change the phone's behavior so the audio is played through the headset by
default rather than the speaker.
1. Press the MENU button.
2. Use the up and down
3. Press the Select soft key.
4. Use the up and down
5. Use the left and right
6. When completed, press the Done soft key.
7. Press the Exit soft key to exit the menus.
1408, 1416 Phone User Guide
IP Office
arrow keys to locate the option Advanced.
arrow keys to locate the option Audio.
arrow keys to switch between the Handset, Headset or Speaker settings for
left and right
arrow keys to locate the option Call Settings....
arrow keys to locate the option Audio Path.
arrow keys or press the Change soft key to change the setting.
key.
arrow keys or press the On/Off soft key.
15-601040 Issue 05a (25 October 2011)
Page 142