Programming A Button - Avaya 1408 User Manual

17. Button Features
Button Lamps
The use of the button lamp or icon will depend on the action associated with the button.
Fixed Buttons
On all the phones, the programmable button features appear below the call appearance buttons. These cannot be
reprogrammed by the phone user.

17.1 Programming a Button

This process is used to select and apply a function to a feature key. It can be used to replace or delete existing functions.
1. Press the Features soft key if shown.
· To access the menu during a call, press the
the Features soft key.
2. Use the up and down
3. Press the Select soft key or the OK button or the
4. Use the up and down
5. Press the Select soft key or the OK button or the
6. Enter your login code.
7. Press the Done soft key.
8. The menu and
9. Inspecting/deleting buttons:
a. Press a buttons to see what function is currently programmed for that button.
b. To delete the function press Delete.To return to the menu press Back.
10.Programming a button:
a. Use the up and down
Select.
b. If the function needs some data, for example an extension number or a number to dial, dial the number.
c. Press the
d. If the button is already configured with a function, you will be prompted whether you want to replace the
existing function. To do so press Replace.
e. Press Back.
11.Repeat the process to program another button or press Back and then Exit to finish.
1408, 1416 Phone User Guide
IP Office
Those
buttons can be used for other special features.
The button feature can be accessed by pressing the appropriate button. However
they can also be accessed through the Button Features section of the Features
menu (press the Features soft key and selecting Button Features). The
and down
buttons. The associated button will briefly flash its red lamp.
The action of each button is normally set by the system administrator. However
you can also use the
buttons.
arrow keys to scroll the display to the option Phone User.
keys to scroll the display to the option Self-Administer.
buttons can now be used in combination to select and apply functions to buttons.
keys to scroll the display to the function you want to apply to a button and press
button to which you want the function applied.
buttons not configured by the system administrators as appearance
arrow keys can then be used to scroll through the programmed
self-administer menu
right arrow key or press the
right arrow key.
right arrow key.
to select and assign actions to the
116
PHONE key and then press
15-601040 Issue 05a (25 October 2011)
up
Page 116