Table of Contents
Advertisement
Before starting to build, take an inventory of this kit to make sure it is complete, and inspect the parts to make sure they
are of acceptable quality. If any parts are missing or are not of acceptable quality, or if you need assistance with assembly,
contact Product Support. When reporting defective or missing parts, use the part names exactly as they are written in
the Kit Contents list.
1
4
4
9
10
Plastic Tree Parts
A1 Z-Bend Clevis (10)
A2 Offset Z-Bend Clevis (4)
B1 Stand-Alone Control Horn (5)
B2 Stand-Alone Control Horn Retainer (5)
C1 Clip Hinge Control Horn (5)
C2 Clip Hinge (26)
C3 Hinge Retainer Ring (10)
C4 Aileron Link Horn (4)
D1 Axle Support (2)
D2 Rod Support (12)
D4 Tailwheel Bracket (1)
D5 Tailwheel (1)
D6 Wheel Collar (2)
E1 Control Surface Brace (4)
E2 Fuselage Joiner (3)
E3 Pushrod Guides (4)
KIT INSPECTION
Great Planes Product Support:
3002 N. Apollo Drive, Suite 1
Champaign, IL 61822
Telephone: (217) 398-8970, ext. 5
Fax: (217) 398-7721
E-mail: airsupport@greatplanes.com
KIT CONTENTS
2
3
5
8
11
Kit Contents (Not Photographed)
F1
Wire Clip (4)
F2
Wing Servo Mount (1)
F3
Fuselage Servo Mount (2)
F4
Fuselage Aileron Servo Mount (1)
G1 Double-Sided Offset Arm, Size B (2)
G2 Double-Sided Arm, Size B (2)
G3 Single-Sided Arm, Size B (4)
G4 Double-Sided Arm, Size A (2)
G5 Double-Sided Offset Arm, Size A (2)
G6 Single-Sided Arm, Size A (4)
G7 Double-Sided Arm, Size C (2)
G8 Double-Sided Offset Arm, Size C (2)
G9 Single-Sided Arm, Size C (4)
Carbon Rods & Tubes
Fuselage Doubler Tube 5.5 x 115mm
Elevator Joiner Tube 3 x 209mm
6
7
13
12
5
Kit Contents
6
1.
Carbon Rods & Tubes
2.
Wing
3.
Ailerons (2)
4.
Horizontal Fuselage Doublers (2)
5.
Vertical Fuselage Halves (2)
6.
Vertical Fuselage Doublers (2)
7.
Rudder
8.
Horizontal Fuselage Halves (2)
9.
Main Wheels (2)
10. Motor/Gearbox Assembly
11. Propeller
12. Elevator Halves (2)
13. Horizontal Stabilizer
Rudder Post Tube 3 x 106mm
Fuselage Main Tube 3 x 679mm
Landing Gear Brace Tube 3 x 111mm
Leading Edge Tube 3 x 915mm
Trailing Edge Tube 3 x 914mm
Landing Gear Legs 2 x 220mm (2)
Rear Wing Struts 2 x 86mm (2)
Wheel Axles 2 x 17mm (2)
Rudder Pushrod 1 x 360mm
Elevator Pushrod 1 x 365mm
Aileron Pushrods 1 x 95mm (2)
Misc. Parts
3mm Plywood Firewall
Prop Saver
O-rings
Advertisement
Table of Contents
