Hard drive
NOTE:
The Hard Drive Hardware Kit, spare part number 809537-001, includes the hard drive bracket and
hard drive connector cable.
Description
1-TB, 5400-rpm, 7.0-mm
500-GB, 5400-rpm, 7.0-mm
500-GB, 5400-rpm, 8 GB hybrid SSD, 7.0-mm
Hard Drive Hardware Kit (includes hard drive bracket and connector cable)
Before removing the hard drive, follow these steps:
1.
Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by unplugging the power cord from the computer.
3.
Disconnect all external devices from the computer.
4.
Remove the top cover (see
5.
Disconnect the battery.
Remove the hard drive:
1.
Disconnect the hard drive connector cable (1) from the system board.
Top cover on page
29).
Spare part number
762990-005
778186-005
732000-005
809537-001
Component replacement procedures
33