TouchPad
Description
TouchPad
Before removing the TouchPad, follow these steps:
1.
Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by unplugging the power cord from the computer.
3.
Disconnect all external devices from the computer.
4.
Remove the bottom cover (see
5.
Remove the battery (see
Remove the TouchPad:
1.
Position the top cover upside down.
2.
Remove the six broadhead Phillips PM2.0×2.0 screws (1) that secure the touchpad and the bracket.
3.
Lift the bracket off the top cover (2).
4.
Lift the touchpad off the computer (3).
Reverse this procedure to install the TouchPad.
32
Chapter 5 Removal and replacement procedures for Authorized Service Provider parts
Top cover on page
29).
Battery on page
53).
Spare part number
not spared