Battery - HP Pavilion x360 Convertible Maintenance And Service Manual

Battery

Description
2-cell, 32-Wh, 4.2-Ah, Li-ion battery for use in all models
3-cell, 48-Wh, 4.21-Ah, Li-ion battery for use in HP x360 310 G2 models
Before removing the battery, follow these steps:
1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect the power from the computer by unplugging the power cord from the computer.
3. Disconnect all external devices from the computer.
4. Remove the top cover (see
Remove the battery:
WARNING!
replacement battery provided by HP, or a compatible battery purchased from HP.
1. Disconnect the battery cable from the system board (1).
2. Disconnect the speaker cable from the system board (2), lift the tape that secures the cable to the
battery (3), and remove the cable from atop the battery (4)
3. Disconnect the USB/card reader board cable from the system board (5) and the USB/card reader board
(6), and then (if replacing the battery) remove the cable from atop the battery (7).
NOTE:
battery.
4. Remove the four Phillips PM2.5×4.0 screws (1) that secure the battery to the computer.
Top cover on page
To reduce potential safety issues, use only the battery provided with the computer, a
If replacing the battery, be sure to attach the flat USB/card reader cable to the top of the new
29).
Component replacement procedures
Spare part number
796355-005
817184-005
53