Kingspan SC100 Installation And Operating Instructions Manual page 54

Heat quantity:
Factory Adjustable
setting down to
min.
Glycol content:
40 % 0 %
Flow rate value for recording flow rate without a flow sensor:
Flow rate value for maximum pump speed:
-- 0
Flow rate value for minimum pump speed:
-- 0
Thermostat:
Factory Adjustable
setting down to
min.
Temperature controlled:
Switch-on temperature:
0 °C 0 °C
Switch-off temperature:
0 °C 0 °C
Differential thermostat:
Factory Adjustable
setting down to
min.
Temperature controlled:
Switch-on temperature difference:
6 K Switch-off
temperature
difference
+ K
Switch-off temperature difference:
3 K 0 K
Maximum heat source temperature:
100 °C Minimum
source
temperature
+ K
54
Adjustable Comment
up to max.
60 %
99 The flow rate value for the maximum pump speed
must be greater than the flow rate value for the
minimum pump speed.
99 The flow rate value for the maximum pump speed
must be greater than the flow rate value for the
minimum pump speed.
Adjustable Comment
up to max.
180 °C The on and off values can be set independently of
each other.
180 °C
Adjustable Comment
up to max.
80 K
Switch-on
temperature dif-
ference - K
180 °C
EN
78.138 | 08.1