Kingspan SC100 Installation And Operating Instructions Manual page 36

7.3.2 Setting the loading strategy parameter
Access the "loading strategy" parameters, (see chapter 7.3.1).
✓
SET: press button.

The display for setting the temperature differential control or

target temperature control appears.
Choosing loading strategy between temperature dif-
ferential control and target temperature control
SET: press button for approx.  sec.

Select either temperature differential control (dT) or target tem-

perature control (T).
Setting the temperature differential value or target
temperature value
SET: press button.

The temperature differential value flashes in the display (e.g.

dT=8 K).
: set the temperature differential value.

SET: press button to confirm.

The target temperature value flashes in the display (e.g.

T=60 °C).
: set the target temperature value.

SET: press button to confirm.

The settings are saved.

7.3.3 Setting the RPM control parameter
Access the "RPM control" parameter, (see chapter 7.31).
✓
SET: press button.

The display for activating (yes) or deactivating (no) the RPM

control is shown.
Activating or deactivating the RPM control
SET: press button for approx.  sec.

Choose between "yes" and "no" for RPM control.

Setting the minimum speed
SET: press button.

The min. RPM value flashes.

: set the minimum speed.

SET: press button to confirm.

The settings are saved.

36
EN
 
[......... [.........
............. .............
............] ............]
Display: 3.1 Display: 3.1
[loading [loading
strategy strategy
of storage tank 1] of storage tank 1]
 
Display: 3.1 Settings window Display: 3.1 Settings window
 
[......... [.........
............. .............
............] ............]
Display: 3.4 Display: 3.4
[RPM [RPM
control control
pump R1] pump R1]
 
Display: 3.4 Settings window Display: 3.4 Settings window
[no] [no]
[yes] [yes]
78.138 | 08.1
8 K 8 K
ja ja
[...] [...]
[...] [...]
(min 50%) (min 50%)