Intended Use; Exclusion Of Liability; Ec Conformity; Safety - Alpha-InnoTec SWC 140H Operating Manual

intended use

The unit may be used only for the intended use. This means:
•
for heating.
• for heating hot water.
• for cooling.
(Availability of the cooling function depends on
the model).
"cooling function" section.
The unit may be operated only within its technical param-
eters.
overview "Technical data/scope of delivery".
notiCe:
notify the responsible power supply com-
pany of the use of a heat pump or heat pump
system.

exclusion of liability

The manufacturer will not be liable for damage resulting
from unauthorized use of the unit.
The manufacturer's liability will also be voided in the follow-
ing cases:
•
if work is performed on the unit and its compo-
nents in a manner that does not comply with the
terms of this operating manual;
•
if work is performed on the unit and its compo-
nents in an improper manner;
•
if work is performed on the unit that is not de-
scribed in this operating manual, and this work
was not expressly approved in writing by the
manufacturer;
•
if the unit or components in the unit are modified,
redesigned or removed without the express writ-
ten permission of the manufacturer.

eC conformity

The unit bears the ce mark of conformity.
ec declaration of conformity


Safety

The unit is operational safe when used for the intended pur-
pose. The construction and design of the unit conform to
the state of the art, all relevant dIN/vde regulations and all
relevant safety regulations.
every person who performs work on the unit must have
read and understood the operating manual prior to starting
any work. This also applies if the respective person has al-
ready worked with such a unit or a similar unit or has been
trained by the manufacturer.
every person who performs work on the unit must comply
with the applicable accident prevention and safety regula-
tions. This applies in particular to the wearing of personal
safety gear.
Danger!
unit operates under high electric voltage!
Danger!
only qualified technicians (trained heating,
cooling, refrigerant and electrical techni-
cians) may perform work on the unit and its
components.
Warning!
observe safety labels on and in the unit.
Danger!
unit contains refrigerants!
Warning!
Leaking refrigerant could result in personal
injury or material damage.
– Shut down unit.
– Ventilate installation location.
– notify the manufacturer's authorized
service center.
Caution.
For safety reasons:
never disconnect the unit from the power
supply network.
We reserve the right to modify technical specifications without prior notice.
UK830300/170717 © Alpha-InnoTec GmbH