Before You Use Secure Function Lock 3.0 - Brother ImageCenter ADS-2400N User Manual

General Information

Before You Use Secure Function Lock 3.0

You can use a web browser to configure the Secure Function Lock settings. Before configuration, do the
following:
1
Start your web browser.
2
In your browser's address bar, type your machine's IP address (or your print server name). For example:
http://192.168.1.2. You can use the machine's LCD to find its IP address.
NOTE
• Find the machine's IP address in the Network Configuration List (see the Network User's Guide).
• If you are using a Domain Name System or enabling a NetBIOS name, you can enter another name such
as "SharedScanner" instead of the IP address.
• For example:
http://SharedScanner/
If you enable a NetBIOS name, you can use the node name.
• For example:
http://brwxxxxxxxxxxxx/
Find the NetBIOS name on the LCD, under Node Name.
• For Macintosh users, access the Web Based Management System by clicking the machine's icon on the
Status Monitor screen. For more information, see Monitor the Machine's Status from Your Computer
(Macintosh) on page 233.
3
Type an Administrator password in the Login box. (This is a password to log on to the machine's web
page.) Click .
NOTE
If you are using a web browser to configure the machine's settings for the first time, set a password
(see the Network User's Guide).
1
1
42