Scan Using Ftp Server Profiles - Brother ImageCenter ADS-2400N User Manual

Scan Using the Control Panel

Scan Using FTP Server Profiles

NOTE
• If you have set up the machine using the USB interface method, you must set up the machine using the
wireless (ADS-2800W / ADS-3600W) with the installation DVD-ROM (see the Quick Setup Guide) to use
the Scan to FTP feature.
• Before starting Scan to FTP, you must configure the Scan to FTP profile (see Scan Documents to an FTP
Server on page 164).
(ADS-2400N / ADS-3000N)
1
Load your document.
2
Press ,
scanning.
To assign the scan feature to the Network Device key, see Assign the Scan Feature to the Network
Device Key 1-3 on page 31.
(ADS-2800W / ADS-3600W)
1
Load your document.
2
Press d or c to display to FTP/SFTP.
3
Press to FTP/SFTP.
4
Press a or b to choose one of the FTP server profiles listed.
Do one of the following:
 If the Scan to FTP profile is complete, go to 7.
 If the Scan to FTP profile is not complete, go to 5.
5
Press Options.
6
Configure the following settings as needed. To configure more detailed settings, press Advanced
Settings. For more information, see page 227. Press OK.

2-sided Scan

Scan Type

Resolution

File Type

Document Size

File Name

File Name Style
or to which you have assigned the Scan to FTP feature. The machine starts
7
7
172