Steering Arm Installation - Mercury 60 FourStroke EFI Formula Race Manual

OUTBOARD INSTALLATION
NOTE: For a more accurate torque, turn/tighten the mounting
locknuts rather than turning the mounting bolts.
a - 1/2 in. diameter bolt (4)
b - Flat washer (4)
c - Locknut (4)
Description
Outboard mounting locknuts and bolts

Steering Arm Installation

IMPORTANT: Fasten the steering arms using the provided
hardware. The locknuts must never be replaced with common nuts
(non‑locking) as they will work loose and vibrate off, freeing the
steering arms.
c
b
81
a
28481
Nm lb. in.
75
lb. ft.
55