Mercury 60 FourStroke EFI Formula Race Manual page 47

3. Install the lanyard stop switch cap onto the stop switch. See
General Information ‑ Lanyard Stop Switch.
a - Ignition module
b - Lanyard stop switch
cap and stop switch
c - Ignition/warning light
4. Shift outboard to neutral ("N") position.
5. Toggle the ignition switch to "ON."
NOTE: The red ignition/warning light illuminates when the
harness is energized and ready to start the engine, or if the engine
goes into Guardian mode. Since this system does not include a
warning horn, the red ignition/warning light acts as a visible
warning system.
OPERATION
a
N
39
b
START ON
OFF
e
d - Ignition switch
e - Start switch
26838
c
d
rob7