Inspection And Maintenance Schedule - Mercury 60 FourStroke EFI Formula Race Manual

EMISSION CERTIFICATION LABEL
An emission certification label, showing emission levels and
engine specifications directly related to emissions, is placed on the
engine at time of manufacture.
a
b
c
d
e
a - Idle speed
b - Engine horsepower
c - Piston displacement
d - Date of manufacture
e - Valve clearance (if
applicable)
OWNER RESPONSIBILITY
The owner/operator is required to have routine engine
maintenance performed to maintain emission levels within
prescribed certification standards.
The owner/operator is not to modify the engine in any manner that
would alter the horsepower or allow emissions levels to exceed
their predetermined factory specifications.

Inspection and Maintenance Schedule

BEFORE EACH USE
• Check engine oil level. See Fuel and Oil ‑ Checking and
Adding Engine Oil.
• Check that lanyard stop switch stops the engine.
• Visually inspect the fuel system for deterioration or leaks.
• Check outboard for tightness on transom.
• Check steering system for binding or loose components.
MAINTENANCE
THIS ENGINE CONFORMS TO
EMISSION REGULATIONS FOR SPARK IGNITION MARINE ENGINES
REFER TO OWNERS MANUAL FOR REQUIRED MAINTENANCE,
SPECIFICATIONS, AND ADJUSTMENTS
IDLE SPEED (in gear):
hp
TIMING (IN DEGREES):
SPARK PLUG:
COLD VALVE
CLEARANCE (mm) EXHAUST:
EMISSION CONTROL
INFORMATION
CALIFORNIA AND U.S. EPA
FAMILY:
cc
FEL:
GAP:
INTAKE:
f - Family number
g - Maximum emission
output for the engine
family
h - Timing specification
i - Recommended spark
plug and gap
46
f
g
g/kWh
h
i
21096