Mercury 60 FourStroke EFI Formula Race Manual page 99

OUTBOARD INSTALLATION
5. Attach the shift cable to the shift lever with a cotter pin retainer.
6. Adjust the cable barrel so the center mark on the cable is
aligned with the end guide when the cable barrel is placed in
the barrel receptacle.
a
b
a - Cable end guide
b - Cotter pin retainer
c - Center mark
7. Place the cable barrel into the barrel receptacle.
8. Lock in barrel in place with the barrel latch.
a - Barrel latch
9. Check shift cable adjustments as follows:
c
a
e
d - Cable barrel
e - Barrel latch
28488
91
d
a
28487