Ceiling; Rear; Screen Aspect (Pt-Cw230Ea Only); Colorboard - Panasonic PT-CW230EA Operating Instructions Manual

Ceiling

This function is used to project the image from a
ceiling-mounted projector.
1 ) Press ▲▼ to select [Ceiling] and then
press the <SELECT> button.
2 ) Press ▲▼ to change the image.
When this function is set to [On], the picture will
be top/bottom and left/right reversed.

Rear

This function is used to project the image from rear of
the screen.
1 ) Press ▲▼ to select [Rear] and then
press the <SELECT> button.
2 ) Press ▲▼ to change the image.
When this function is set to [On], the picture will
be left/right reversed.

Screen aspect

(PT-CW230EA Only)

This function is used to project the image to a 4:3 or
16:9 projection screen.
1 ) Press ▲▼ to select [Screen aspect]
and then press the <SELECT> button.
2 ) Press ▲▼ to choose one from the
items as below.
16:10 is the aspect of the DLP

Default(16:10)

chips.
16:9 Set to a 16:9 projection screen.
4:3 Set to a 4:3 projection screen.
Attention
When the [4:3] function is selected, [Natural wide] is not
available in the AV screen.
When the [16:9] function is selected, [Wide (16:9)] is not
available in the AV screen.

Colorboard

For the image projected on a colorboard.
1 ) Press ▲▼ to select [Colorboard].
2 ) Press ► or the <SELECT> button to
display the submenu.
At the time of simple projection on the colored
wall, you can get the close color image to the
color image projected on a white screen by
selecting the similar color to the wall color from
the preset four colors.

Reset

To reset the adjusted data, all adjustments will return
to their previous figures.
Press ▲▼ to select [Reset] and then
press the <SELECT> button.
A confirmation box appears and then select
[Yes].
Screen
51
ENGLISH -