Projecting; Selecting The Image; How To Adjust The State Of The Image - Panasonic PT-CW230EA Operating Instructions Manual

Projecting

Check the connections of the peripheral devices and connection of the power cord (
power ( page 28) to start the projector. Select the image and adjust the state of the image.

Selecting the image

Select an input signal.
The image selected with the <COMPUTER 1>, <COMPUTER 2>, <HDMI>, <VIDEO>, <S-VIDEO>, or
<COMPONENT> button is projected (
Attention
Images may not be projected properly depending on the connected device and DVD, video tape, etc. to be played. Select a
system format that is suitable for the input signal in [Component] or [RGB] in the [Input] menu (
Check the aspect ratio of the screen and the image and select the optimum aspect ratio under the [Screen] menu
( page 49).

How to adjust the state of the image

Zoom and Image Position Adjustment
Press the ZOOM +/- buttons on the control panel to adjust the screen size. Screen size can be adjusted 84% to
100% from its maximum screen size.
It is not available when On-Screen menu is displayed.
Zoom adjustment can be memorized.
The image position can be adjusted in the Zoom Adjustment by the following steps:
1 ) Press the ZOOM+ or ZOOM- button on the control panel.
2 ) While ZOOM+ or ZOOM- is displayed on the screen, press the <SELECT> button. Arrow marks displayed
on the screen.
3 ) Press ▲▼◄► buttons on the control panel or the remote control to adjust the image position.
Note:
Zoom and Image Position Adjustment can not be operated when 4:3 or 16:9 mode is selected in the [Screen aspect] menu
or [Custom] is selected in the [Screen] menu.
The image position adjustment can not be adjusted at ZOOM maximum.
The white arrows indicate that there is no correction.
A red arrow indicates the direction of correction.
An arrow disappears at the maximum correction.
Focus Adjustment
Adjust the lens focus with the focus lever.
Focus Lever
Note
It is recommended that the images are projected continuously for at least 30 minutes before the focus is adjusted.
If keystone distortion occurs, see "KEYSTONE". (
page 31).
page 50)
page 26) and switch on the
page 40).
ENGLISH -
31