Connections; Before Connecting To The Projector; Connecting Example - Panasonic PT-CW230EA Operating Instructions Manual

Hide thumbs Also See for PT-CW230EA:
Table of Contents

Advertisement

Connections

Before connecting to the projector

Read carefully the instruction manual for the device to be connected.
Turn off the power switch of the devices before connecting cables.
If any connection cable is not supplied with the device, or if no optional cable is available for connection of the
device, prepare a necessary system connection cable to suit the device.
Video signals containing too much jitter may cause the images on the screen to randomly wobble or wafture.
In this case, a time base corrector (TBC) must be connected.
The projector accepts the following signals: VIDEO, S-VIDEO, analogue-RGB (with TTL sync. Level) and
digital signal.
Some computer models are not compatible with the projector.
When using long cables to connect with each of equipment to the projector, there is a possibility that the image
will not be output correctly unless a compensator is used.
For details on what video signals the projector supports, see "List of compatible signals". ( page 73-76)

Connecting example

Audio system
Video deck
(TBC built-in)
Attention
When connecting with a video deck, be sure to use the one with a built-in time base corrector (TBC) or use a TBC between
the projector and the video deck.
If nonstandard burst signals are connected, the image may be distorted. If this is the case, connect a TBC between the
projector and the video deck.
Note
When using an HDMI cable, check that it is compliant with the HDMI standard. Using a cable that is not compliant with the
HDMI standard may result in problems such as the image cutting out or not appearing.
When connecting the 1080p signal using HDMI, use a cable compliant with 1080p signal.
This projector does not support the Viera link (HDMI).
For the specifications of the RGB signals that can be applied from the PC, refer to "List of compatible signals". (
76
)
See "Network operation" in the instruction manual on the supplied CD-ROM for the details of wired LAN communication
between the projector and the computer.
Computer
3D glasses
Control computer
Blue ray disk player with HDMI
IN terminal
73-
page
25
ENGLISH -

Advertisement

Table of Contents
loading

This manual is also suitable for:

Pt-cx200ea

Table of Contents