Precautions for Use
Cautions when transporting
When transporting the projector, hold it securely by its bottom and avoid excessive vibration and impacts.
Doing so may damage the internal parts and result in malfunctions.
Do not transport the projector with the adjustable feet extended. Doing so may damage the adjustable feet.
Cautions when installing
Do not set up the projector outdoors.
The projector is designed for indoor use only.
Do not use under the following conditions.
Places where vibration and impacts occur such as in a car or vehicle: Doing so may damage the internal parts
and result in malfunctions.
Near the exhaust of an air conditioner or near lights (studio lamps, etc.) where temperature changes greatly
(Operating environment
outer case and malfunctions.
Near high-voltage power lines or near motors: Doing so may interfere with the operation of the projector.
Do not install the projector at elevations of 2700 m (8858 ft) or higher above
sea level.
Failure to do so may shorten the life of the internal parts and result in malfunctions.
Do not use the projector installed vertically or tilted right or left ( page 21 ).
Using the projector at a vertical angle that exceeds 40° may reduce product life or result in malfunction.
Be sure to ask a specialized technician when installing the product to a
ceiling or wall.
If the product is to be installed hanging from the ceiling or wall, purchase an optional Ceiling Mount Attachment.
(Optional accessories
Please call a specialized technician or contact an Authorized Service Center for installation.
12
- ENGLISH
page 78): Doing so may shorten the life of the lamp or result in deformation of the
page 16).