About Your Projector; Remote Control - Panasonic PT-CW230EA Operating Instructions Manual

About Your Projector

Remote control

(18)
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
(9)
(1) <AUTO SETUP> Button
Execute the setting of Auto setup in the setting
menu. ( page 53)
(2) Input Selection Buttons: <COMPUTER 1>,
<COMPUTER 2>, <HDMI>, <VIDEO>,
<S-VIDEO>, <COMPONENT>.
These buttons are used to select the input signal.
( page 31)
(3) ▲▼◄► Buttons, <SELECT> Button
Navigate the MENU display. ( page 37)
(4) <SCREEN> Button
Select a screen mode. ( page 49)
(5) <MENU> Button
Open or close the On-Screen Menu. ( page 37)
(6) <FREEZE> Button
Pause the projected image and sound tentatively.
( page 34)
(7) <AV MUTE> Button
Temporarily turn off the image on the screen.
( page 35)
(8) <D.ZOOM +/-> Buttons
Zoom in and out the images.
(9) <VOLUME +/-> Buttons
Adjust the volume of the speaker. ( page 35)
(10) <
Turn the projector on or off. ( page 28)
(10)
(11) <KEYSTONE> Button
Correct keystone distortion. ( page 34)
(12) <INFO.> Button
Operate the information function. ( page 60)
(13) <LAMP> Button
Select a lamp mode. ( page 35)
(14) <P-TIMER> Button
Operate the P-timer function. ( page 35)
(15) <3D> Button
Operate the 3D function. ( page 36)
(11)
(16) <IMAGE> Button
(12)
Select the image mode. ( page 35)
(17) <MUTE> Button
(13)
Mute the sound. ( page 36)
(14)
(18) Remote control signal emitter
(15)
(16)
Attention
(17)
Do not drop the remote control.
Avoid contact with liquids.
Do not attempt to modify or disassemble the remote
control.
Note
If there are any obstacles between the remote control
and the remote control signal receptor, the remote
control may not operate correctly.
You can operate the projector by reflecting the remote
control signal on the screen. The operating range may
differ due to the loss of light caused by the properties of
the screen.
When the remote control signal receptor is lit with a
fluorescent light or other strong light source, the
projector may become inoperative. Set the projector as
far from the luminous source as possible.
Point the remote control toward the projector (remote
control signal receptor) when pressing the buttons. See
the below figures indicating Maximum operating range
for the remote control.
11.5'
(3.5 m)
> Button
16.4'
(5 m)
ENGLISH -
16.4'
(5 m)
17