Oven Lights; Cooking Tables - Kenmore 790. 4637 Series Use & Care Manual

Oven Lights

Be sure the range is unplugged and all parts are COOL before replacing oven light(s). Wear a leather-faced
glove for protection against possible broken glass.
Wire
Holder
Figure 1

Cooking Tables

Glass
Shield
Foods for
BAKE pad
*Decrease normal cook time by:
Frozen foods, pies,
pastries and pizza
Refrigerator cookies
Refrigerator biscuits
Rolls & Breads
Fresh Pies/Pastries
Begin with the maximum reduction in
cook times and adjust as needed.
*Recommended reduction in cook
times based on brands of food items
tested. Cook times may vary with your
specific brand of food item.
To Operate the Oven Lights
Both of the interior oven lights automatically turn on when the oven
door is opened. Press
the oven door is closed. Each oven light is located at the rear wall of
the oven interior and is covered with a glass shield held by a wire
holder (See Figure 1). The Glass Shields must be in place whenever
the oven is in use.
To Replace the Oven Light:
1. Turn electrical power off at the main source and unplug the
range.
2. Press Wire Holder to one side to release the glass shield.
3. Replace the old bulb with a new 40 watt appliance bulb.
4. Replace Glass Shield over bulb and snap Wire Holder into place.
5. Turn power back on again at the main source (or plug in the
range).
6. The clock will then need to be reset. To reset, see Setting the
Clock in this Use & Care Guide.
CONVECTION
15-25 %
15-35 %
15-30 %
20-25%
10-20 %
36
to turn the lights ON and OFF when
Foods for MEATS pad in
Food Categories
*Decrease normal cook time by:
Meats
Poultry (unstuffed)
Begin with the maximum reduction in
cook times and adjust as needed.
*Recommended reduction in cook
times based on brands of food items
tested. Cook times may vary with your
specific brand of food item.
15-30 %
20-30 %