Bake - Kenmore 790. 4637 Series Use & Care Manual

Setting Oven Controls
Setting Bake
The BAKE pad controls normal baking. If preheating is necessary, refer to the
instructions. The oven can be programmed to bake at any temperature from 170° F to 550° F (The sample shown below is
for 350°F).
INSTRUCTIONS
To set the Bake Temperature to 350°F:
1. Arrange interior oven racks and place food in oven.
2. Press , "- - - °" will appear in the display (Figure 1).
3. Press
"350°" will appear in the display.
4. Press . A beep will sound once the oven temperature
reaches 350° F and the display will show "350°" and "BAKE"
(Figure 3).
Pressing will cancel the Bake feature at any time.
To change the Bake Temperature (example changing
from 350° to 425°F):
1. After the oven has already been set to bake at 350°F and the
oven temperature needs to be changed to 425°F, press
(Figure4) and "- - - ° " will show in the display.
2. Press
"425°" will appear in the display.
3. Press . "BAKE" and "425°" will appear in the display
(See Figure 6).
Note: If the oven was recently heated from prior cooking and
has remaining heat, the bake element symbol may not show in
the display immediately.
(Figure 2). "BAKE" will flash and
(Figure 5). "BAKE" flashes and
PRESS
21
Preheat Feature for
DISPLAY
Figure 1
Figure 2
Figure 3
Figure 4
Figure 5
Figure 6