Table of Contents
Advertisement
3
• Side panels are required whenever the sides
S tep
• Side panels are not required when the
Install
Side
• Side panel installation will be determined by
Panels
• Side panels must be installed plumb.
Illustration A
1/4" Side Panels –
Insert end of side
panel into case trim.
Fasten with Velcro
strips included.
Standard 4" high toekick or trim to fit. Height
may vary depending on application.
Illustration C
1/2" to 3/4" Side
Panels – Recessed
front edge of side
panel. Fasten to
adjacent cabinet.
Standard 4" high toekick or trim to fit.
Height may vary depending on application.
of the refrigerator will be exposed and when
installed between frameless cabinets. See
pages 3 and 4.
refrigerator is installed into an enclosure.
the design of the side panel you have previ-
ously chosen.
23-9/16"
84"
Trim
2-9/16"
23-5/16"
84"
2-5/16"
Installation
36" Stainless Bottom Mount Refrigerators
• If you choose to use 1/4" side panels, they
should be inserted into the case trim as
illustrated. Fasten the panels to the refrigera-
tor with velcro strips (provided) before setting
refrigerator in place. See illustration A.
• 1/2" to 3/4" side panels are normally set into
place and fastened to adjacent cabinetry or
the back wall before rolling the refrigerator
into the opening. See illustrations B and C.
Illustration B
1/2" to 3/4" Side
Panels – Leading
edge of side panel is
flush with cabinet
front. Fasten to the
back wall using a
cleat.
84"
Standard 4" high toekick or trim to fit.
Height may vary depending on application.
24-3/4"
3-3/4"
9
Advertisement
Table of Contents
