Care | Connect & Clean milk system rinsing
Milk system cleaning
Milk system cleaning consists of two parts.
• Display-guided milk system rinsing
• Weekly Place the All-in-One spout, the milk hose,
and the milk nozzles in cleaning solution
Connect & Clean milk system rinsing
Scalding hazard.
If the milk hose has not been threaded onto the
milk nozzle all the way to the stop, or if it is
kinked or pinched, then the milk hose may come
loose during the milk system rinsing.
> Always thread the milk hose over the milk
nozzle all the way to the stop.
> Always insert the milk hose into the guide
with care.
> Do not kink or pinch the milk hose.
DI_06_05_01
Start care programs
Start milk system rinsing with
milk system rinsing
OK: P
browse: -/+
The display shows the individual steps that must be
completed prior to rinsing.
WMF 1000 S only
Push All-in-One spout all the way up
Place a collection container under the All-in-One
spout
Wipe off the outside of the milk hose with a clean,
damp cloth
Connect the milk hose with the milk nozzle to the
hot water
spout [1]
Turn the milk hose counterclockwise until it reaches
the hard
stop [2]
54
CaUtIon
Observe the Safety chapter
w starting on page 81
1
2
User Manual WMF 1000 S/1000 pro S