Operation
3.4 Dispense milk or milk foam
3.4.1
Warm milk
Place a suitably sized cup under the All-in-One spout
WMF 1000 S only
Push All-in-One spout all the way up
Briefly press the milk button
A cup of warm milk is dispensed.
After the milk is dispensed, slide the All-in-One spout
down a little bit
Start / stop mode
Press the milk button briefly to stop the dispensing
before it is finished.
3.4.2
Milk foam
Place a suitably sized cup under the All-in-One spout
WMF 1000 S only
The All-in-One spout must not be in the top position.
Press and hold the milk button
Dispensing continues for as long as the button is held.
Milk can drip out after dispensing.
> Allow the cup to rest for a moment after
dispensing a beverage, or place a collection
container under the All-in-One spout.
> Slide the All-in-One spout upward slightly
after beverage dispensing, so that less milk
drips out.
24
Set milk foam volume
w Settings
w Beverage setting
w Milk foam volume
page 36
tIp
User Manual WMF 1000 S/1000 pro S