Beverage Dispensing - WMF 1000 s User Manual

Operation

3.3 Beverage dispensing

Pressing the beverage button starts the dispensing of
the selected beverage.
• Lit up beverage button
• Flashing beverage button = beverage dispensing
• Unlit button
™ Place a suitably sized cup below the combi spout
™ Press the desired beverage button
The desired beverage is dispensed.
Cancel beverage dispensing
™ Press the off/c
Interrupting milk dispensing
™ Briefly press the beverage button
The milk portion dispense cycle is interrupted and is
followed by coffee dispensing.
Warm rinsing
During a warm rinsing, the coffee lines are flushed with
hot water. The water warms the brewing system and
guarantees an optimum coffee temperature.
When warm rinsing is activated
™ Briefly press the beverage button
If more than 10 minutes have passed since the last
beverage was dispensed, the display shows the question
of whether to perform a warm rinsing.
The warm rinsing may be skipped.
22
= ready to dispense
= not ready to dispense /
button disabled
button
Beverage buttons
w page 23
Height adjustment of the
All-in-One spout
w page 25
Activate / deactivate warm
rinsing
Basic settings
w page 44
User Manual WMF 1000 S/1000 pro S