Connect Up The Milk - WMF 1000 s User Manual

2.6.2 Determine the water hardness
™ Request the water hardness reading from your water
supplier, or determine it by using the WMF carbonate
hardness test in the accessories (complete with
instructions)

2.7 Connect up the milk

When shipped, the milk hose has been inserted over the
assembled All-in-One spout.
Use a suitable milk nozzle on the milk hose.
WMF 1000 S milk nozzles
Colour
• brown = milk temperature 4–8 °C
• transparent = milk temperature 8–16 °C
WMF 1000 pro S milk nozzles
Colour
• white = milk temperature 4–8 °C
• black = milk temperature 8–16 °C
™ Move the All-in-One spout to the lowest position
™ Insert the suitable milk nozzle into the milk hose
™ Insert the milk hose into the guide, see illustration
The water tank must not be inserted.
The milk hose must not be under tension or bent when
adjusting the height of the All‑in‑One spout.
The milk hose must always be placed carefully into the
guide. The milk hose must not be in front of the coffee
grounds container or the coffee grounds container
opening.
™ Insert the end of the milk hose into the milk pack
User Manual WMF 1000 S/1000 pro S
or with the milk lance
Start-up
The unit used is the
"Deutsche Karbonathärte"
(°dKH)
13