Beverage Dispensing - WMF 1100S User Manual

4.3

Beverage dispensing

Touching the beverage buttons triggers dispensing of
the beverage selected.
• Lit up button
• Unlit button / red triangle
in the header bar
™ Place a cup of the appropriate size beneath the
spout
™ Touch the desired beverage button
Cancel beverage
™ Touch the desired beverage button again
4.4 Selection pads (optional)
Optional buttons are available, such as the Barista pad
shown here. These selection buttons appear on the
display after the beverage has been selected.
4.5 Special buttons (optional)
Special buttons are optional and are activated in the
settings if desired.
An example for a special button is the S-M-L pad.
These S-M-L cup volumes need to be set for beverages
in order for them to be available.
The cup volume "S" or "L" can then be selected
prior to selecting a beverage, and then only those
beverage buttons that have that size available will be
illuminated.
M = size of the beverage set, no pre-selection
S = approx. 25 % less than M
L = approx. 25 % more than M
User Manual WMF 1100 S
Operation | Beverage dispensing
= ready to dispense
= not ready to dispense /
button disabled
DI_00_00_00_00
Espresso Cappuccino
Café Crème Latte Macchiato
Button layout
w O perating options
page 49
Milk Choc Milk coffee
Cancel beverage
w O perating options
page 51
Example:
Barista pad
S M
Example:
S-M-L pad
L
23