Yamaha YZ450FA 2011 Owner's Service Manual page 253

2. Install:
• Bushing "1"
• Collar "2"
• Dust seal "3"
• Apply the molybdenum disulfide grease on
the bearing and dust seal lips.
• Install the dust seals with their lips facing in-
ward.
3. Install:
• Rear shock absorber
4. Install:
• Bolt (rear shock absorber-frame) "1"
• Washer "2"
• Nut (rear shock absorber-frame) "3"
Nut (rear shock absorber-frame):
56 Nm (5.6 m•kg, 40 ft•lb)
Apply the molybdenum disulfide grease on the
bolt.
REAR SHOCK ABSORBER
5. Install:
• Bolt (rear shock absorber-relay arm) "1"
• Nut (rear shock absorber-relay arm) "2"
Nut (rear shock absorber-relay
arm):
53 Nm (5.3 m•kg, 38 ft•lb)
Apply the molybdenum disulfide grease on the
bolt.
5-59