Yamaha YZ450FA 2011 Owner's Service Manual page 151

5. Install:
• Push rod 2 "1"
• Ball "2"
• Push rod 1 "3"
Apply the engine oil on the push rod 1, 2 and
ball.
6. Install:
• Pressure plate "1"
7. Install:
• Clutch spring
• Bolt (clutch spring)
Bolt (clutch spring):
10 Nm (1.0 m•kg, 7.2 ft•lb)
Tighten the bolts in stage, using a crisscross
pattern.
8. Install:
• O-ring (clutch cover) "1"
Apply the lithium soap base grease on the O-
ring
9. Install:
• Clutch cover "1"
• Bolt (clutch cover)
Bolt (clutch cover):
10 Nm (1.0 m•kg, 7.2 ft•lb)
Tighten the bolts in stage, using a crisscross
pattern.
4-40
CLUTCH