GCC Technologies RX Series User Manual page 55

4. Press [UP ARROW /DOWN ARROW] to change the
values of the actual length.
Scale Width
Fixed scaling, for maintenance only.
Scale Length
MAC Address Shows the MAC Address of your cutting plotter.
IP Address Shows the IP Address of your cutting plotter.
Shows your IP address for TCP/IP Configuration
DHCP
Select Units Provide four-unit systems for users convenient.
Select To select displayed languages on LCM panel in English,
Language Spanish, Italian, Deutsch, Japanese, Portuguese, Polish,
Turkish or French.
Sizing Setting
Allows user to set the sizing settings.
If set to user defined mode, the user will be asked to select the
size setting every time the machine is turned on.
If set to Default Roll, Roll type sizing will be performed
whenever the machine is turned on.
Firmware To display the version number of Firmware and FPGA code,
Version varying from model to model
Set To build up the communication between host computer and
cutter.
Communication
Baud Rate is to determine the speed of data transmission.
Data Bits refers to the size of one block of data.
Parity is used to check if data was revived correctly or not.
9600, n, 7, 1, p
9600, o, 7, 1, p
9600, e, 7, 1, p
9600, n, 8, 1, p
9600, o, 8, 1, p
9600, e, 8, 1, p
19200, n, 7, 1, p
19200, o, 7, 1, p
19200, e, 7, 1, p
19200, n, 8, 1, p
19200, o, 8, 1, p
19200, e, 8, 1, p
Paper Saving To save media by four different modes:
Mode 1. Length expanded mode
3. Both expanded mode
AAS Offset To set or modify AAS offset value.
You can refer to "5.3 Printer Test" for more details.
First Back to
To enable the carriage back to the previous origin; when
Origin
"Enable" is selected, the carriage will not go back to the
previous origin while the selection of "Disable" allows the
carriage to do so.
Vacuum To help improve tracking and cutting accuracy by turning on
the fans. If you turn off the vacuum system, the fans
will remain inactive during cutting or plotting.
Auto Unrolled
To adjust the unrolled media length.
Length
To cut off the material automatically when the job is completed,
The Control Panel
9600pbs, 7 Bits with NO Parity
9600pbs, 7 Bits with ODD Parity
9600pbs, 7 Bits with EVEN Parity
9600pbs, 8 Bits with NO Parity
9600pbs, 8 Bits with ODD Parity
9600pbs, 8 Bits with EVEN Parity
19200pbs, 7 Bits with NO Parity
19200pbs, 7 Bits with ODD Parity
19200pbs, 7 Bits with EVEN Parity
19200pbs, 8 Bits with NO Parity
19200pbs, 8 Bits with ODD Parity
19200pbs, 8 Bits with EVEN Parity
2. Width expanded mode
4. Both unexpanded mode
[ CUT OFF ]
3-10
RX Series User Manual
Disable
cm/gram; inch/oz; Metric
cm/oz; inch/gram
English
User Defined User
/Default Roll Defined
Length
expande
d mode
Enable Enable
Disable
Enable, Disable Enable
500-3000 mm 500 mm