GCC Technologies RX Series User Manual page 22

RX Series User Manual
of the machine. Then, insert the M6 screws into the holes of Roll Holder support assembly
and tighten them with M6 L-shape screwdriver. Like Figure 2-9.
M6 screws
Screw holes
Roll Holder Assembly
Figure 2-10
Roll Holders
Figure 2-9
Step 5
Place the two roll holders into the holes of Roll Holder Support (Figure 2-10).
Step 6
The complete Desktop Media Support System will be shown as in Figure 2-11.
Figure 2-11
Installation
2-9